Now available single wheel trailers for your Royal Enfield.
This versatile trailer come with tow hitch and mounting brackets ready to fit onto a Royal Enfield Bullet. The lights are wired but a plug of your choice has to be fitted.
Very easy to install, and very easy to tow, making camping/ shopping etc much easier

Price £725.00 including vat

We now stock Pazon Electronic Sure Fire ignition systems to fit your Royal Enfield Bullet. A really excellent upgrade for you bike which eliminates all the mechanical auto advance, points, & condensor.
This fits straight into the distributor of your bike and with a few simple tools it is easily fitted, A timing degree disc is advisable to get the ignition timing set.
This kit will also fit Triumph/Bsa single with points in side cover
We also ahve available a Pazon Electronic Sure fire Ignition sytems for Royal Enfield twins Interceptor, & constellation , Super Meteor with distributor ignition systems

Price £82.00 + vat total £94.30

WE have various used engines both 350cc & 500cc in various condition, from good running take out to engines requiring rebuild.
We have stock of as removed engines complete with primary drive & gearbox, or just basic engines

all are sold as seen and approved and with no warranty or guarantee
Prices from £200.00 + vat

Contact us for more details

A new electricaly operated stop solenoid/fuel injection pump is now available from Price Part Motorcycles to fit the popular Yanmar Clone diesel conversion.

It is very simply fitted and easily wired into place, and can be wired to the main ignition switch to allow engine shut off when key is switched off.

If you require any more information please contact our technical staff for more information.

Price £40.00 + vat p&p

Available in stock sprag clutch kits for all Royal Enfield Electric start Bullets and Electra X
Kit consists of
Inner sprag bearing
Snap ring
Drive gear
Driven gear.

Price £135.00 + vat

Fitting service available on request, prices from £185.00 + vat includes sprag clutch, removal and refit, new gaskets, main shaft seal. oil.
any other parts required are charged extra

Now available in stock new design needle roller bearing and crank pin assembly.
This consists of a Silver plated high quality needle bearing, precision ground & hardened linear steel crank pin, factory original alloy crank pin, machined to take a outer hardened & ground bush, which is then honed to the correct tolerance for the needle bearing.

These are more tolerant of low oil flows & pressures, but give a better running at high rev capability.

Price £185.00 + vat

Now available in oversize for damaged flywheels locations, either 010 inch or 015 inch oversize. The flywheel location has to be machine to fit. Please contact us for more technical information

we also offer a crankshaft rebuild facility, using either these new needle roller cranks, our very popular and successfull roller bearing crank, or the standard floating bush.

We are now stocking quality Regina drive chain to fit your Royal Enfield Bullet. We can supply any length up to 25 foot roll,or cut to siut your application.
Regina type 136RS (Reynolds type 530)

Standard 350cc chain 94 pitch £30.00
Standard 500cc chain 95 pitch £32.00
19 tooth gearbox sprocket 96 pitch £32.00

These are supplied complete with spring joining link.
Crank links are stocked

These chains will fit many other classic Britsh Motorcycles, please contact us for prices.

Now available in stock the following Whitworth spanners and sockets

6 piece whitworth combination set, comprising of 1/8 3/16, 1/4, 5/16, 3/8,, 7/16 part no 61158 Price £12.00 + vat set

8 piece Whitworth 3/8 drive socket set, comprising 1/8, 1/4, 3/16, 5/16, 3/8, 7/16, 1/2, 9/16 part no 61159 price £25.00 + vat

6 piece Whitworth open ended spanner set. sizeas from 1/8 to 1/2
part no 61160 price £18.00 + vat

We are always looking for used Royal Enfields, condition is not important, it can be dead, no engine, no wheels. We require these bikes for restoration and conversion to our very successful Diesel Conversions.

If you have anything you think may be suitable please contact with the details, an instant decision will be made, and payment will be made on collection/delivery.

Now that the sale of Classic Royal Enfield 350cc & 500cc has ceased, what better time to look at restored/rebuilt Classics.

These are 1960's based Royal Enfield, carefully stripped down, engines rebuilt as either 350cc or 500cc depending on your choice, all parts are then repainted or replaced, rewired and completly rebuilt back to and as new standard, but with the advantage of 12volt electrics, indicators, & brake lights.
You can either purchase from us at an on the road price of £2950.00
We can ship to you direct from India, landed at U.K port £1950.00, this comes with original registration paperwork so you can get registered with an age related number plate. (please contact us for more details.) Delivery is approx 12 weeks from time of order/payment

Now available from stock 350cc high compression pistons, these come with pin, clips and ring sets. These will also fit the 700cc twin Super meteor, Constellation. available in oversize so you can reclaim your original cylinder.
Price £89.50.00 + vat

Available from stock on either a service exchange or outright sale option. reconditioned 350cc Royal Enfield Bullet Engines.
These have been carefully rebuilt with new crank pin & bearings, new crankshaft bearings, new piston cylinder kit, new cylinder head, with new rockers and push rods. Adjustable cam pinions with new cam gears fitted. New oil pump shaft and worm, and a new distributor.

price on service exchange £450.00 + vat (service exhachange)

The latest Royal Enfield Bullet to be converted to a Diesel powered engine.
rated at 10hp at 3600 rpm, this gives a top speed of 61mph, and a cruising speed of 50mph, and returning 150-170 mpg.

Do you fancy a trip of a lifetime, Ride a Classic Royal Enfield into the high mountains of the Himalayas. Leaving Delhi, you collect your motorcycle and wend your way up into the mountains, for 7, 10, 14, 0r 21 days you decide. With a mechanic travelling with sort any of your problems.

Please contact us for more details, prices, itinery etc .

for sale 2004 125cc Bajaj Wind, Taxed, Mot. New back tyre, 3500 miles from new. 5 speed gearbox. Kick start only. Ideal learner bike



price £800.00. We can deliver if required extra at cost

There is an editorial artricle in the March edition of Classic Bike guide and the Old Bike Mart about the Price Part Motorcycle diesel conversion for a Royal Enfield Bullet.

Diesel Engine powered Royal Enfield motorcycles are now here, powered by the Yanmar clone engine of 406cc,, they now come with electric start,
Choice of front brakes, either the new disc brake or the classic twin leading shoe drum brake.
These are carefully rebuilt, the frames are powder coated gloss black, all small fitting parts, ie swinging arm, centre stand, foot rest pedals rear mudguard stays are also powder coated gloss black.
The wiring looms are all replaced with new genuine Royal Enfield looms, all switches are either OE supplier or factory original.
Wheels all have new hubs with stainless steel spokes and wheel rims fitted.
A choice of tyres is available, but standard is the classic Avon Speedmaster Mk2 tyres, size 3.25 x 19 front and 3.50 x 19 rear.
Other tyres can be fitted as etxra.
The mudguards, diesel tank, and tool boxes are all painted gloss black.
The dual seat is fitted as standard but single sprung seats are an option.
Prices for these start at £3050.00 for kick start
£3400.00 for electric start
All come with 12 months road tax and MOT where applicable.

Trials kits available from Price Part Motorcycles to fit the Indian built Royal Enfield Bullet Price £850.00 + vat and delivery
Parts include.
Chrome petrol tank.
Chrome high mount exhaust sytem, 350cc or 500cc
Chrome front mudguard and stays.
Chrome rear mudguard and stays
Single sprung leather seat.
Trials style Handle bars.
Under engine guard.
Bolt on side stand.
Options
Seperate Chrome Headlight with Chrome mounts
Steering head.

7th August 2007

We offer a crankshaft rebuild service for your Classic 350cc Royal Enfield Bullet or Classic 500cc Bullet,

Strip down crank cleaned and checked then rebuilt using our new Roller Bearing Crank Pin, a new connecting rod, the crank is then checked for alignment before returning to the customer.

Price £185.00 + VAT

WE recommend the fitting of our High Capacity oil pumps for use with the Roller Bearing Crank pin.